Universal Woodworker Attachment
Equally suitable for beams, boards and round bars. For drilling, cutting, sawing holes and grinding. For accurate horizontal work. Drills and cuts beams and boards in the absolute centre. Smoothly adjustable working depth. Comes complete with hand grip, depth stop, insert for smaller workpieces and return springs. Can be used with all drills with a 43mm Eurohals. (Supplied without drill)
|
|
18V Rechargeable Drill/ Driver Set
1.7 Ah 18 Volt powerful, low-friction motor 18 Volt environmentally-friendly removable rechargeable battery Runs to left and right Electronic speed regulation through accelerator switch, smoothly adjustable from 0-550 rpm.Constant speed even under load thanks to fitted electronics Rubberized non-slip handle 17 speed settings High quality 10 mm Peacock quick-action drill chuck Comes with case Wiha XSelector Bits GOOD (1.7)The complete set consists of the following parts: 18-volt rechargeable batterydriven dr
|
|
Westfalia Westfalia Laser Bench Drill 250 W
maximum precision with 2-line laser control; significantly improved operating safety; perfect drilling with significantly more time- saving; stable metal precision control; generously dimensioned base-plate; bench-plate adjustable for height; 5 speeds; powerful 250 Watt motor. Westfalia
|
|
18V Rechargeable Screwdriver
The newly-developed Westfalia Ergo 18V Cordless drill/Driver has been developed according to the latest state of the art with regard to ergonomics and easy handling. Thanks to its innovative housing form, the weight of the battery is optimally distributed over the whole of the machine. The high quality motor is controlled by a stepless electronic speed control, which permits sensitive control while screwing or drilling. 16 adjustable torque stages allow the user to tighten screws as required by the material
|
|
Holster for Electric Drills
Holster for Electric Drills! In tough cow-hide. Suitable for left and right handers. Specially recommended for rechargeable drills. (Price not including drill).
|
|
Westfalia Westfalia Impact Screwdriver 12V/1.3 Ah
The power pack from Westfalia is characterised by enormous torque and great reserves of power. Applies up to 70 Nm to shift difficult screws. You can loosen even jammed and rusted screws and/or screw long screws into wooden beams
|
|
Westfalia Westfalia Impact Hammer Drill 1050 W in metal gear case
1050 Watt ? Electronic speed control ? 13 mm gearring drill chuck ? 2-speed gearbox in metal gear-case ? 43 mm Euro collar, easily fits any upright drill ? Incl. work-case. With 9 pieces. Titanium drill set for stone, wood, metal gearbox housing
|
|
Westfalia 18V/1,7 AH CORDLESS DRILL
The newly developed Westfalia Ergo 18 V rechargeable drill/driver was designedfollowing to recent developments in ergonomics and handling. The new type of housing means that the weight of the battery is distributed evenly over the whole machine. The highpowered motor is electronically regulated using a smooth speed controller and thus allows sensitive drilling or screwing. 16 adjustable torque settings let the user screw materials correctly, without damaging the workpiece. Technical specifications: 18 V hi
|
|
Metabo 900W Electronic CombinationHammer KHE 32
Suitable for insert tools with SDS Plus Insert stock. Hammer stop lock for drilling without impact, Rotation stop lock for chiselling, Forward-reverse operation, Metabo
|
|
Westfalia Electronic Pneumatic Hammer Drill920 W
The Westfalia pneumatic hammer drill handles its 920 watt power so effectively that you can obtain bore diameters of up to 26mm, even in concrete. In addition, the drill has an impact stop to facilitate drilling in wood and metal. The drill
|
|
3-piece Whetstone Set
The three whetstones, in dimensions 150 x 45 x 15mm are interchangeably mounted on a firm wooden base. 1 whetstone in silicon carbide for roughing out (coarse). 1 soft natural Arkansas stone for sharpening. 1 hard natural Arkansas for fine finishing. Supplied with 1 bottle whetting oil (100ccm) for the Arkansas oiled stones. The base provides a firm anchorage for the stones, so you obtain excellent results. Complete Set.
|
|
Drill Attachment Pump With DP 03
With DP 03 Pump Attachment. For restoring torque-free fixing of each drill with EURO spindle collar. Connection with threads for 1/2 and 3/4 hoses and Gardena
|
|
Westfalia TiN Bi-Metal Holesaw Set
The bi-metal trepanning saws cut iron, steel, cast iron, hardwoods and softwoods, plasterboardand much, much more. The additional titanium nitride coating on the saw blades gives severaltimes the usual life. The particular surface hardness enables whatever material to be cuteven quicker than before. The edges of the cuts are visibly cleaner
|
|
Pneumatic Chisel&Hammer Drill
Enormous power development through the new type of angular gear, with impact power of 2.8 Joules With extensive range of accessories 400% greater productive capability than impact drilling machines. Via the directional power of 620 watts and the new type of angular gear, this hammer drill penetrates through the hardest materials in concrete and masonry. The electropneumatic impact system enables rapid drilling and chiselling with 2.8 Joules of impact power. The sturdy and compact design with its aluminium g
|
|
3-Piece Nylon Sander Set
The super sander insert for drills lets you get into all the corners and angles. The nylon bristles that replace the abrasive media are great at stripping and provide a long service life
|
|
Makita Makita Electronic Drill/Driver
Use as drill, screwdriver andthread cutter. Universallyusable drill with 10mm quickchangechuck. Clockwise andanti-clockwise action. Powerconsumption 400 watt, idlingspeed 0-1,050rpm. Drillingperformance for wood up to18mm. Weight 1.48kg. 2 yearguarantee.
|
|
Westfalia Spare battery 18v 1.3AH for 261644
Spare battery for item 261644
|
|
Pneumatic Hammer Drill+Hammer Drill Set
920 watt high power motor,3 functions: drilling, impact drilling and chiselling, Max. bore diameter in concrete 26mm, Compact device
|
|
Bosch Pneumatic Drill and Hammer ChiselPBH 240 RE
Power consumption 620 Watt, SDS-Plus Tool chuck, idling speed: 0-840rpm. Electronic control system. Forward/reverse operation, triggerlocking switch for long term operation. Drilling performance in wood/concrete: 30mm/24mm. Impacts per minute 0-4600. Rotation stop lock Hammer stop lock, weight approx.2.8kg Accessories: 13mm quickchange chuck for round shaft drills, 9-piece drill case, 1 flat chisel and plasticcarrying case, 2 year guarantee.
|
|
Westfalia Pneumatic Drill and Chisel Hammer1020 Watt with 6pc Drill Set
1020 Watt high-perform-ance motor, vibration-iso-lated
|
|
Westfalia Westfalia adapter chuck - for every drill
Your drill becomes a power screwdriver with the
|
|
Westfalia Tool Holder, for small drill
Westfalia Drill/Milling Machine Stand. Ideal accessory for electronic miniature drilling and milling machines, for use with flexible drive. The stand can be adjusted between heights of approx. 30cm to 100cm. Screw clamp attaches machine stand to edge of any work bench, and can also beused as storage holder for accessories. The drill/milling machine is suspended on the attachment fixed to the stand, and can thus be rotated via 360
|
|
Makita Makita Cordless Drill / driver + screw Holder Set
This Eclusive Offer for Westfalia customers consists of: Makita Rechargeable Electronic Dril6207DWDE
|
|
Electronic Hammer Drill 500W
Compact Hammer Drill for drilling metal, stone and wood. The inbuilt spirit level ensures clean, straight holes. The soft grip prevents slipping and enables a good transfer of force to the machine. Max. drilling penetration: stone 13mm, metal 10mm, Wood 20mm. Packed in sturdy plastic case incl. Additional handle, 1 pair spare carbon brushes and chuck key.
|
|
Drill and angle grinder holder
For clamping of drill and single-handed angle grinders (with 43mm Euro neck)horizontally or vertically at the workbench. Best suited for sharpening,de-rusting, polishing, grinding, etc. Variable angle adjustment Angle grinder and drill not supplied.)
|
|
Makita Electronic Hammer Drill HR2450
For drilling, hammer drilling and chiselling
|
|
Drill Guide Template For Tiles
Ideal for restoring threads. What makes it special: the re-threading nut first locates the old thread and does not cut the new one next to it. Contents:M6 x 1, M7 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75.
|
|
Westfalia Westfalia Mini Drill & Cutting Tool
Suitable for all work, such as drilling, grinding, milling, polishing, separating, engraving and repairs in difficult to access places, DIY, home and hobby, and also for engraving (glass, wood, metal) and other decorative activities. Compact, easy to handle shape and easy operation. The digital LCDdisplay allows you to accurately set the optimum speed for the various requirements and materials in steps of 1000 rpm, using 2 buttons. Weighs only 0.54kg Locking button for rapid tool change 100 watt ma
|
|
Drive/20-pce Accessory Set
Length of flexible drive shaft approx. 700mm. Insturdy plastic case. Price not including drill anddriver handle. Drill collet 6mm. dia up to 4200rpm.
|
|
Bosch Handy rechargeable screwdriver
Handy rechargeable screwdriver IXO 3.6 V. The next development for the successful IXO screwdriver is here! Now with illumination of the work position thanks to a super-bright LED light. Improved ergonomics: even smaller, lighter and handier. With battery charge display and 12 additional screwdriver bits. Technical specifications: max. screw diameter 5mm, idling speed 180 rpm, max. torque 3.0 Nm, battery capacity 1.1 Ah, weight approx. 300 g. Packed in a sturdy sheet steel box; comes with charging station.
|
|
Drilling/Milling Tool
Bores holes for 4-6-8-10-12mm dia, PLUSmills, slits, shapes and contours (Laserscale in flute. Suitable for up to 10mmmaterial thickness).
|
|
Hinge Hole Bit Template
For accurate hinge holes. Mobile and stationary use, for hinge hole and Forstner bits. Adjustable for dimensionally accurate distances from edge, with depth stop and workpiece clamp. Suitable for all current hinge hole and Forstner bits. Suitable for bits of 26 and 35mm diam. No tearing of the drill hole edge. Made from glass-fibre reinforced plastic. Drill drive.
|
|
Precision Drill Rig Set
? Clean drilling at last in wood, metal and plastics ? Solid base made from diecast aluminium ? Comes with 60 mm machine vice ? 43 mm Euro holder fits almost all drills ? T
|
|
Westfalia Westfalia 3.6 V Li-Ion Battery-Powered Screwdriver with Accessories
3.6 V Li-Ion Battery Powered Screwdriver with 30 Accessories. Very latest Lithium-Ion battery technology has been built into the compact 3.6V screwdriver. The rechargeable battery- unlike NiCd or NiMh batteries -does not lose power due to self-discharging, therefore the screwdriver is ready for use at any time. The creeping capacity loss (memory effect) has also been prevented
|
|
Metabo SBE 850 Contact, 850 Watt ImpactDrill
2-speed impact drill with 850-watt highperformance motor, full-waveelectronics, very durable die-cast aluminium drive housing, with safetyslip clutch, clockwise/anticlockwise running, 13mm rapid tension drillchuck, unloaded running speeds 0- 1000 / 0-3000 rpm-1, max. no. ofimpacts 57,000/min, max. torque 22 Nm, max. drilling capacity in concrete 20mm / steel 13mm / wood 40mm. Items supplied: Rapid tension drill chuck, additional handle, drill depth stop, carrying case, incl. 18 -piece selection of drill-bit
|
|
Makita 12 V Cordless Drill/Driver
High torque up to 80Nm (never achieved before). Robust planetary gearbox. Effective cooling air guide system inside motor casing prevents motor overheating, even at high loads. Environmentally-friendly nickel-metal hydride rechargeable battery with 2.6 Ah capacity. Constant output electronics. 2-year guarantee. Standard supply in case with 2 batteries.12 V 6317DWDE:
|
|
SDS-plus mounting shaft
For Bits
|
|
Cleaning Disc 100 mm / 12.7 mm
Ideal for removing rust, paint, dirt, mortar residue etc. from metal, wood andcar bodywork. Cleans and smoothes the surface. Adapts to the shape of the material being worked. Replaces wire brushes and manual scrapers.No need to prepare the disc. Usable on all surfaces and edges. Cleaningdisc comes complete with fixing plates and 8mm tensioning spindle. Discs: diam 100mm, width 12.7mm.
|
|
Westfalia Introductory offer
710 Watt Professional Hammer Drill Gear casing made from high-quality aluminium Up to 46,800 impacts/minute Electronic speed control (0- 2,800 rpm.) Very clean working and highest precision Powerful high-performance motor with great reserves of power Comes with sturdy plastic case At last
|
|
Milescraft Angle Drive Attachment
For electric drills. Converts your drill into an angle drill. Essential for working in tight spaces. Construction height approx. 130mm. 10mm ringgearchuck. Additional lateral handle.
|
|
Westfalia Cordless Boring and Milling Machine with 2 battery packs
Aprofessional tool which works anywhere without mains supply. Whether you are drilling, sanding, cutting or engraving, this machine gives you independence from the power supply. Also ideal for work on the car or in the garden. Thanks to the 2 battery packs you will always be prepared, even for longer jobs. easy-to-handle shape, length 23cm 9.6V operating voltage 3 hours chargingtime electronic speed control from 5,000 to 25,000 rpm including case with 80-piece accessory set, 2.4 and 3.2mm chu
|
|
Bosch Cordless Drill PSB 14.4 Vi
Newly-developedhammer mechanism formaximum impact.Comfortable operation,thanks to switchable hammer function, clockwiseand anti-clockwise operation, along with multipositionsoft grip. Standard equipment:Charger, rechargeable battery, additional handle,case. Technical specifications: Power14.4V Rechargeable battery capacity 1.5 Ah NiCd Max. torque 42 Nm Idling revs 0-2100rpm Max. penetration for concrete/steel/wood/stone: 10/10/20/13mm Screw dia Wood5x90mm Weight approx. 2.2 kg
|
|
Cordless Drill/Driver
The complete set consists of the following components: 18 Volt Cordless Drill/Driver with quick-release chuck, Charger, 18-Volt Rechargeable Battery, sturdy carrying case, 6 Spiral Bits, 6 Screw Bits and a Magnetic Holder.Weight approx. 1.8kg. Incl. Wera Rapidaptor Bit Holder worth
|
|
Makita Angle Drill
With 450 watts of power for workingin narrow, hard-to-reach places. The angledrill has a very narrow effective width ofonly 79mm. High intensity LED foroptimum illumination of work area. Slimshape with ergonomically situated rockerswitch, on-switch safety lock andelectronics for accurate centre drilling.Idling speed 0-2400rpm., T-chuck colletwidth 0.8-10mm. Drills through up to 10mmin steel and up to 25mm in woods. Weightapprox. 1.4kg. 2 year guarantee.
|
|
Workshop V-shaped Machine Vice Jaw width 100mm
Precision design. Finely ground bearing surfaces. Hardened steel Vshaped jaws for vertical and horizontal tensioning. Upper edges for tensioning of flat material Precise guiding Spindle with trapezoidal thread. Finely metered fine adjustment. Painted in hammer tone finish. 10 year guarantee.
|
|
Bosch Li-Ion Rechargeable Screwdriver
Technical data and accessories:
|
|
Bosch BOSCH Flat Chisel 250 mm
Side cutter with the new innovative 3-cutter geometry. The two notching teeth on the wedge surfaces both provide more splitting force and to a large extent prevent tiresome sticking of the chisel. Fits all SDSplus hammer drills. Length 250mm.
|
|
Bosch 10.8V Cordless Drill Driver PSR300 LI
Charge level indicator, forward/reverse drive indicator, 10 torque settings, hex quickchange chuck. Soft handle, Power light. Technical specifications: 10.8V/1 Ah, max. drilling depth wood 10mm, steel 6mm, idling speed 0-400, weight: 0.9kg, supplied with: case, 5h charger, 2 hex drill bits, 10 Bits, magnetic bit extender.
|
|
Westfalia 10.8V Lithium RechargeableScrewdriver
Light, handy shape. With very powerful 10.8V lithium rechargeable battery. Idling speed 0 - 400 rpm. Charge time 3 - 5 hours. Direct attachment of bits. Runs to left and right. No decrease in performance during whole duration of operation. Very low self-discharge. Fully ready for use even after months of non-use. Good grip with rubberised handle. Comes with charger and plastic case. 2 yearguarantee.
|
|
10 Piece Set of HSS Milling Cutters
10-Pce Set Of HSS Milling Cutters. Shank diameter 3 mm. Contents: 1 slitting cutter, 1 shank-type cutter, 1 drop-shaped cutter, 1 spherical cutter, 1 face-milling cutter, 1 bevelled cutter, 1 trapezoidal cutter, 1 pointed cutter, 1 rounded cylindrical cutter, 1 oval cutter
|
|
4-Piece Rotating Milling and Filing Set
Industrial quality HSS. For milling and filing all types of steel, with universal gearing.
|
|
Westfalia 40 Piece re-chargeable Screwdriver set
Westfalia 40 -Piece Battery-Powered Screwdriver Set. ? 4.8 Volts ? Pistol grip ? Spare rechargeable battery ?Charger ? 1 Case incl. 29 drill bits ? 15 torque settings ? Clockwise/anti-clockwise action ? incl. 8 sprocket wheels 6-13 mm. In case. Handy rod version. With clockwise & anti-clockwise action. With eight socket spanners inserts from 6 to 13 mm, one adapter, 29 different drill bits, charger (T
|
|
100 Piece Accessories Set in a wooden box
Contents: 5-piece diamond grinding and cutter set, 5 different receiving shanks, 10 abrasive paper rings (large), 5 abrasive paper rings (small), 10 abrasive cut-off wheels (large), 20 abrasive cut-off wheels (small), 1 felt polishing wheel, 10-piece abrasive set, small grindstone, pot of polishing paste, mini circular saw blade, mini diamond abrasive wheel, 4 wire brushes, 2 hair brushes.
|
|
Westfalia 1020-Watt Pneumatic Drill andChisel Hammer
1020 Watt high-performance motor Vibration-isolated
|
|
11 Piece Set Pencil Grinders
(ball, wheel, cylinder, cone) 11 pieces 40-50mm length, shank
|
|
Chuck Holder
For clamping the drilling unit horizontally or vertically on the bench. Idealfor sharpening, grinding , polishing, etc. Suitable for drills with 43mmEuro-neck
|
|
Screwdriver Holder - leather -
Made of strong, hard-wearing leather. Specially recommended for battery-poweredscrewdriver.
|
|
Milescraft BASE PLATE - METAL BUSHING SET
Take care of all your template work with one kit Metal-Nose Bushings - For longer life. Universal, Clear 7 (178mm) Base PlateScratch resistant surface, fits most routers. 2 Self-Centering Pins For accurate, one-time centering of your plate. TurnLock Technology Exchange bushings in seconds without tools 8 Popular Sizes (11mm, 11.11mm, 13mm, 15.9mm, 17mm,20mm, 24mm, 30mm) For dovetailing, sign making, mortise tenon,butt hinge or other common templates. Adaptor for Metal BushingsWorks with all 1 3/16 standar
|
|
Westfalia Westfali 24V Impact Drill 1.7 AH,with charger
Technical Specifications:
|
|
Black&Decker Cordless Drill/Driver KC12GTK
With patented Gel Cushion in rubberised handle. With 5 torque stages, quick-change chuck and bit store with 6 screwdriver bits. With continuously variable electronic control switch and enlarged ventilation slots. Technical Data: 1.2 Ah, max. torque 9.3 Nm, 5 torque stages, idling speed 0-700rom., max. drill performance: in wood 25mm, in Steel 10mm, charging time 3 hours, Weight: 1.256 kg. Supplied with: 10mm quick-change drill chuck, bit store with 6 bits, 1.2 Ah spare rechargeable battery, 3-hour charger,
|
|
Westfalia 176 Piece Mini Drill Accessory Set in case
176-piece Mini Drill Accessory Set in case Exceptionally well selected set of accessories
|
|
Westfalia Re-chargeable Hammer Drill, 18V, 1.7AH
Set consists of the following parts: 18- volts rechargeable battery powered impact drill. Rapid batteryb charger unit, 18-volts. 1.7 Ah rechargeablebattery, sturdy portable case, 6 drills, 6 drill bits, 1 double bit, 1 adapter.2 year guarantee.
|
|
Westfalia Re-chargeable Battery, 24V, 1.7AHfor Nr.509679 + 509810
24 Volt 1.7 Amp spare rechargeable battery suitable for model No.50 98 10
|
|
Westfalia Rechargeable Drill 18V, 1.7AH with Case and Accessories
The new model with powerful 1.7 Amp rechargeable batteries. Significantlymore power, longer life, optimal power transfer. Clockwise/anticlockwise running, electronic speed control via power acceleratorswitch, variable from 0-550 rpm. Also constant rpm under load via integral electronics. Rubberishes non-slip handle.17 stage torque adjustment. High quality 10mm Peacock quick-grip chuck. Including case.
|
|
Westfalia Rechargeable Angle Drill with case - 18V 1AH
An essential carpentry tool, for installation work, car repairs, assembling furniture, etc. Can be used anywhere that there is restricted headroom. Savestime and energy. Instead of tiresome drilling and screwing with an angled screwdriver in hard-toreach areas, you can get to work rapidly and withno problems. Angled design
|
|
Diamond coated Rubber Abrasive Wheels - 4 pieces
Diamond coated Rubber Abrasive Wheels. 2 pces, approx. 22mm diam, 3mm thick and 2 pieces approx. 15mm diameter, 3mm thick.
|
|
Westfalia Re-chargeable Battery, 18V, 1.7AH
18-Volts spare rechargeable battery 1.7 Ah
|
|
Quick Action Drill Chuck
Now with hard alloy jaw surfaces and full metal body
|
|
Westfalia 18V CORDLESS DRILL+SPARE BATTERY
The brand new model with high-power 1.7 Ah rechargeable batteries
|
|
Westfalia 18V Re-chargeable Battery, 1.7AH
18 Volt replacement rechargeable battery 1.7 amps for No. 50 95 39.
|
|
Westfalia Re-chargeabe Screwdriver + Holder
40 -Piece Battery-Powered Screwdriver Set. 4.8 Volts Pistol grip Sparerechargeable battery Charger 1 Case incl. 29 drill bits 15 torque settings Clockwise/anti-clockwise action incl. 8 sprocket wheels 6-13 mm. In case. Handy rod version. With clockwise & anti-clockwise action. Witheight socket spanners inserts from 6 to 13 mm, one adapter, 29 different drill bits, charger (T
|
|
Makita 18 V Cordless Drill/Driver
High torque up to 80Nm (never achieved before). Robust planetary gearbox. Effective cooling air guide system inside motor casing prevents motor overheating, even at high loads. Environmentally-friendly nickel-metal hydride rechargeable battery with 2.6 Ah capacity. Constant output electronics. 2-year guarantee. Standard supply in case with 2 batteries.18 V 6347DWDE:
|
|
Westfalia 180 piece Workshop Tool Kit
10 year guarantee
|
|
Impact Drill+Drills
13mm crown gear chuck, switchable forward/reverse drive, switch for drillingand impact drilling, lock button for sustained operation, with secondhandle and depth gauge, anti-slip grip. Technical specifications: 710 Watt, 230V
|
|
Impact Drill Bit, 40mm - 82mm
Impact Drill Annular Bit. (Box sinker) carbide- tipped. complete with SDS mounting, shaft and centre drill. Tiles Brickwork Concrete. SDS-Plus. ->
|
|
14 Piece Rotary Abrasive Belts
14-Piece Rotary Abrasive Belts. 12 abrasive belts and 2 abrasive supports, coarse and medium grain, 3 each, abrasive width approx. 12 mm, abrasive tool diam. approx. 12 mm and 7 mm, shank diam. 3.0 mm, length approx. 35 mm.5 mm.
|
|
Westfalia Westfalia Electronic Angle Drill 380 W
Electronic angle drill with 130mm low design for narrow and difficult access areas. Handy, ergonomic and balanced design. Ring-gear drill chuck clampingrange up to 10mm, complete with drill chuck key. ?Safety lockout switch. ? Switchon block. ? Powerful 380 Watt motor, 230 Volt/50 Hz ? Electronic accelerator switch variable 0- 1500 rpm. ?Clockwise/anti-clockwise running. ? The rubberised surface coating ensure in addition a non-slip holding of the device, structuredgrip area/soft zone ? Maximum drilling per
|
|
Impact hammer drill + chisel set
Now even more productive with 3 functions:
|
|
Westfalia Westfalia Hand-Held Mixer 500 W
Handy dual function mixer and drill. As a result of the electronic continuous speed control, the powerful, air-cooled, high-torque motor effectively transfers the power into a stirring motion without overheating the motor. The electronic speed control is ideal for all mixing jobs of up to 30kg, including paints, lacquers, liquid low viscosity casting solutions, tile adhesives, skim materials, adhesive mortars, cement skims, plaster skims, pastes and thick casting solutions with medium viscosity. Low speeds
|
|
Westfalia Westfalia Impact Drill 900 W incl. case
Hammer Drill
|
|
15-Piece Grinding Roller Set
Fits any power drill set consists of following special rubber grinderholders with diam/mm; 12.5; 18.5; 38.5; 50.5; 5.2 incl. grinding rings (5 x 2 pieces). This useful and practical set of grinding rollers should be part of the contents of every trade and DIY workshop.
|
|
Rechargeable drilling screw set
3.6 V Li-Ion Battery-Powered Screwdriver With AccessoriesVery latest Lithium-Ion battery technology has been built into the compact 3.6V screwdriver. The rechargeable battery unlike NiCd or NiMh batteries does not lose power due to recharging
|
|
Westfalia Rechargeable Drill/Driver 18V
Westfalia 18 Volt Electronic Rechargeable Battery Powered Drill. With quick-change chuck 1.5-10mm. Accelerator switch. Screw bit. 17-position torque setting with rechargeable battery and charger unit. CE tested.
|
|
Adjustable Circle and Ring Cutterwith 2 HSS Blades
For use with drills and crank braces. Ready for cutting: 30 -120mm. A very versatile tool, cuts thin s h e e t m e t a l , b o a r d s , plywood, multilayer tiles, plastics, rubber items, plaster tiles, etc. The bladecarrying rail is supplied with an easy to read scale. Complete with centring drill and centring point.
|
|
Westfalia Impact Drill 710W
13mm crown wheel drill chuck, reversible clockwise/anti-clockwise running, switch-over for drilling and impact drilling, locking button for continuous operation, with two handles and depth stop, non-slip handle. Technical specifications:
|
|
15 Piece Woollen polishing discs
15pce Wool Polishing Wheels, Wheel diam. approx. 24mm &12mm, thickness approx. 5mm
|
|
Makita HP 2051 Impact-drill
mechanical drive metal drive head safety slip connection impact can be cut off handle with rubber cushion for safe handling and comfortable operation. Slim design Low vibration. Technical specifications: 720 watts / 230 volts 1st speed 0-1.200 rpm, 2nd speed 0-2.900 rpm > drilling performance in masonry 20 mm, in steel 13 mm, in wood 40 mm 13 mm quick action chuck weight approx. 2.3 kg. 2 year guarantee.
|
|
Collomix Mixing Paddle
M14 , 10-15 kg , 120 mm , 590 mm
|
|
Hammer Drill and Chisel Hammer + Flat - Notching - Chisel
620 Watt Pneumatic Hammer Drill and Chisel Hammer:
|
|
Milescraft Mini Drill And Miller Tool Stand
Stand Changes any mini milling tool into a precision drill rig! Gearwheelguided forward feedn for controlled drilling Recuperatingspring
|
|
8 Piece mini HSS Spiral drill bitsset
8-Piece Mini HSS Twist Drills. Shank diam. 2.3mm
|
|
Flexible Drive for item no. 533430
Flexible Drive. Suitable for electronic mini drill and milling machine. No 53 34 30. Equipment: 2 retaining nuts 5 chuck jaws 3 flanges 1 shank lock 1 spanner
|
|
Westfalia 710 Watt Professional Hammer Drill
Gear casing made from high-quality aluminium Up to 46,800 impacts/minute Electronic speed control (0- 2,800 rpm.) Very clean working and highest precision Powerful high-performance motor with great reserves of power Comes with sturdy plastic case At last
|
|
Westfalia Westfalia Pneumatic Hammer Drill and Chisel 620 W - in a case
Enormous power development through the new type of angular gear, with impact power of 2.8 Joules With extensive range of accessories 400%greater productive capability than impact drilling machines. Via the directional power of 620 watts and the new type of angular gear, this hammer drill penetrates through the hardest materials in concrete and masonry. The electro- pneumatic impact system enables rapid drilling and chiselling with 2.8 Joules of impact power. The sturdy and compact design with its a
|
|
Mini Drill&Cutting Tool+Rotating Vice
Suitable for all work, such Repairs in difficult to access places, DIY, home and hobby, and also for engraving (glass, wood, metal) and other decorative activities. Compact, easy to handle shape and easy operation. The digital LCD display allows you to accurately set the optimum speed for the various requirements and materials in steps of 1000 rpm, using 2 buttons.
|
|
Hammer Drill
Enormous power development through the new type of angular gear, with impact power of 2.8 Joules With extensive range of accessories 400% greater productive capability than impact drilling machines. Via the directional power of 620 watts and the new type of angular gear, this hammer drill penetrates through the hardest materials in concrete and masonry. The electro- pneumatic impact system enables rapid drilling and chiselling with 2.8 Joules of impact power. The sturdy and compact design with its alu
|
|
Collomix Mixing Paddle FM 80
8 mm , 5-10 kg , 80 mm , 400 mm
|
|
Twin Drill replacement battery
Replacement battery Li-Ion 18V , 1,3 Ah
|
|
7 pcs HSS Core-Drill-Set
7-pieces for M3 to M12 dia 2.5-3.3-4.2-5.0-6.8-8.5-10.2mm
|
|
Collomix Mixing Paddle FM 120
Drill-Mounted Mixing MachineSuitable for building site work:
|
|
