DELTA CHARGER, VOLTCRAFT - CARSON
The Delta Charger is the perfect universal charger for at home and on the road. It has three outputs for charging your batteries.
|
|
UNIVERSAL AUTOMATIC CHARGER - VOLTCRAFT
This universal charger has an integrated charging system for lead-acid batteries which can be switched on when required. The automatic system is used for charging 2, 6 and 12 V lead-acid batteries. Gassing and overcharging are effectively prevented and the charge condition is continuously monitored. This charger can also be used for NiCd and NiMH batteries with voltages from 1.2 V to 12 V in nonautomatic mode. The charger adjusts automatically to the voltage of the connected cells and the charging current c
|
|
Charging Station ALC 8500 Expert - VOLTCRAFT
|
|
MICROPROCESSOR RECHARGEABLE BATTERY MAST - H-TRONIC
You need a charger for your model room or your laboratory, an intelligent charger that can charge and maintain several battery packs at the same time? Then you need the Akkumaster C4. This microprocessor-controlled battery charging and maintenance station lets you charge, maintain, discharge and measure four different batteries or battery packs, separately and simultaneously. The integrated microprocessor carries out the selected programme while monitoring all operating parameters. It is very simple to oper
|
|
BATTERY CHARGING STATION 3000 + 48M WARR - VOLTCRAFT PLUS
A real highlight from the Voltcraft Development Labs! Microprocessor Charger station with 9 programmes for the best possible maintenance and charging of NiCd and NiMH rechargeable batteries and lead-acid standard, gel and membrane batteries of 2/4/6/8/10/12 and 24 V. The parameters and programmes set in the expert mode for various battery packs are stored in non-volatile EEPROM memory and can be recalled and changed. There is a 4-digit display and status LEDS and an acoustic signal when the charging process
|
|
PLUG-IN CHARGER ACS 110 MOBILE - ANSMANN
Fully automatic microprocessor controlled plug-in charger for charging NiCd/NiMH rechargeable battery packs with 1 - 10 cells, without having to make any settings.
|
|
REFLEX CHARGING STATION RLG 7008 - VOLTCRAFT
The patent Reflex charging system is particularly attractive if you want to charge your batteries in the shortest possible time. The RLG 7008 can provide a maximum charging current of 8 A and charging rates of up to 4 C. This means: the Reflex charging system makes extremely short charging times possible, only 15 mins, without damaging the batteries. The charging process is divided into four steps: Soft Start, Rapid Charging, Transition Charge and Trickle charge. Additionally, charging impulses prevent the
|
|
BATTERY CHARGER STATION 3000 - VOLTCRAFT PLUS
CT-3000 charger station with 10 programmes for the best possible maintenance and charging of NiCd and NiMH rechargeable batteries and lead-acid standard, gel and membrane batteries of 2/4/6/8/10/12 and 24 V. The parameters and programmes set in the expert mode for various battery packs are stored in non-volatile EEPROM memory and can be recalled and changed. There is a 4-digit display and status LEDs and an acoustic signal when the charging process ends. As the CT-3000 features a RS-232 interface you can ch
|
|
BATTERY CHARGER STATION 2500 - VOLTCRAFT PLUS
A real highlight from the Voltcraft
|
|
DC MULTISYSTEMLADER WITH DISPLAY -
|
|
ANSMANN UNI JACK PLUG CHARGER AC48 - ANSMANN
For directly charging NiCd and NiMH rechargeable battery packs of 4 - 8 cells (4.8 - 9.6 V). The charging current depends on the number of cells and is adjusted automatically. With the multiple plug system, the polarity can be reversed with a pole-reversal coupling. The charging process is indicated by a red LED. Can be connected to almost any charging socket.
|
|
"BATTERY CHARGER ""MINI 1""" -
|
|
UNIVERSAL CHARGER + 48 MONTH GUARANTEE - VOLTCRAFT
For NiCd, NiMH, lead-acid/lead-gel/lead membrane and lithium-ion batteries. You can select the battery type from the programme switch. The number of cells is configured using a rotary switch: You can select the charging current from 150 mA to 1.5 A, to suit the battery capacity. To counteract the memory effect, you can discharge NiCd batteries in advance. The subsequent switch to fast-charge mode is automatic. Damaged rechargeable batteries are detected during the battery test phase. The LEDs show the charg
|
|
CHARGING STATION 2500 + 48 M - VOLTCRAFT PLUS
A real highlight from the Voltcraft Development Labs! This microprocessor-controlled charging station has 9 different programmes to enable you to optimize charging and maintenance of NiCd and NiMH batteries. The clear 2 line display shows all charging details. A range of individually configurable functions allows you to use this Voltcraft charger station for a wide range of applications. Easy operation: in the Auto mode the charging voltage, charging current, end-of charge voltage and discharging current ar
|
|
UNIVERSAL CHARGER UNIT 150-1500MA - VOLTCRAFT
For NiCd, NiMH, lead-acid/lead-gel/lead membrane and lithium-ion batteries. You can select the battery type from the programme switch. The number of cells is configured using a rotary switch: You can select the charging current from 150 mA to 1.5 A, to suit the battery capacity. To counteract the memory effect, you can discharge NiCd batteries in advance. The subsequent switch to fast-charge mode is automatic. Damaged rechargeable batteries are detected during the battery test phase. The LEDs show the charg
|
|
PLUG-IN CHARGER FOR POWER-PACKS -
Designed for 4 - 8 cells, this charger with Tamiya connector is also ideal for your 6-cell racing packs.
|
|
10A POWER SUPPLY FOR 12V CHARGERS 230V -
With this power supply unit, you can run your 12 V chargers with a maximum 7 A charging current from a 230 V AC home mains supply.
|
|
MULTI-CHARGER, VOLTCRAFT - CARSON
This extremely cost-effective multiple charger is just what you need for reliably charging your NiCd/ NiMH rechargeable batteries. For stationary use.
|
|
MULTICHARGE CABLE -
|
|
CHARGING CABLE A -
|
|
CHARGER ADAPTOR FOR ROUND RECHARGEABLES - VOLTCRAFT
The adapter is connected to the corresponding battery pack charger using two optionally available connection leads with 4-mm connectors, and is able to charge up to four round cells of the same type. The universal charger adapter can be used to charge type AAA, AA, C and D round cells with a maximum charging current of 3 A. With the adapter you can also quickly provide a power source.
|
|
CHARGING CABLE J -
|
|
CHARGING BAY FOR ROUND-CELL BATTERIES - VOLTCRAFT
You can use this adapter to charge individual cells with a charger designed for battery packs. Long connecting cables, 360 mm
|
|
