AXIAL FAN 3412L - EBM PAPST
Full power is not always necessary. Because of its variable operating voltage from 7 to 15 V/DC, this fan is ideal for temperature-controlled speed controllers. These high-quality fans run on ball bearings which guarantee quiet running and a long service life. Ideal for temperature-controlled speed controllers
|
|
AXIAL FAN 8412L - EBM PAPST
Full power is not always necessary. Because of its variable operating voltage from 7 to 15 V/DC, this fan is ideal for temperature-controlled speed controllers. These high-quality fans run on ball bearings which guarantee quiet running and a long service life. Ideal for temperature-controlled speed controllers.
|
|
HEATING FOIL 100X65MM PAIR - THERMO
|
|
HEATING FOIL 130X70MM PAIR - THERMO
|
|
HEATING FOIL 320 X 137 MM -
|
|
HEATING ELEMENT 12 V 150 W -
The very compact and powerful 3-part heating element is especially suitable for building climate chambers and drying ovens. The PTC characteristic of the element means that no further driver is needed. When the maximum heating temperature is reached, the current consumption falls, preventing the module from self-destructing. The mounting brackets on the sides make it easy to install the element. The maximum power can be adjusted to 50, 100 or 150 W by removing individual heating plates.
|
|
HEATING FILM 110X77MM M SELF-ADHESIVE -
|
|
TEST CLIP TC 16 -
For 14/16-pin DIL enclosure. Easy installation and removal of ICs. Gold-plated contacts for low contact resistance.
|
|
IC INSERTION TOOL -
This handy tool is designed for inserting 14 to 28-pin DIL ICs into their socket.
|
|
PRECISION TEST SOCKET, 28 PINS -
|
|
PRECISION TEST SOCKET, 24-PIN -
|
|
PRECISION TEST SOCKET, 40-PIN -
|
|
PIN ALIGNMENT TOOL -
The pins of many ICs are not bent to the required grid pattern. With this tool you can easily straighten the pins of a wide range of ICs. Suitable for 8 to 40-pin ICs. Can also be used for re-aligning bent IC pins. An essential tool for anyone working in electronics.
|
|
IC REMOVAL TOOL -
For removing ICs from PLCC sockets. Suitable for 20-pin to 124-pin ICs.
|
|
HEAT TRANSFER FILM 200X200MM - BERGQUIST COMPANY
The film can be cut to size. It reduces the heat resistance between component and heatsink by improving the surface contact
|
|
BOND PLY 50X50MM - BERGQUIST COMPANY
|
|
INSULATING FILM 200 X 200 MM - BERGQUIST COMPANY
The film can be cut to size. No need for heat-transfer paste.
|
|
THERMO-MODULE TECI 12705 -
|
|
PELTIER ELEMENT TEC1-12708 -
|
|
PELTIER ELEMENT TEC1-7105 -
|
|
PELTIER ELEMENT 12714 -
|
|
PELTIER ELEMENT TEC1-3105 -
|
|
THERMO-MODULE TECI 1703 -
|
|
BALL BEARING MOUNTED FAN - SEPA
"This mini fan, with its 12-hour ""burn-in"" and 2 special ball bearings, is completely reliable and very durable. Its high air output, low current consumption, vibration-free running and compact size make it particularly suitable for spot cooling of electronic components and for cooling high-power CPUs."
|
|
SMD SOLDERING PASTE 2.5 CCM -
For laboratory samples, small series, for soldering SMD components with a heat gun, hot plates, soldering irons, etc. In convenient syringe for neat and precise application. May be applied directly from the cartridge.
|
|
SMD VACUUM PINCERS -
This pipette can be used for picking up and placing even the smallest SMD components The silicone tube has a rotary connection to prevent the hose from twisting in the opposite direction when the pipette is turned.
|
|
