DESOLDERING ABSORBENT BRAID 1.5M NC/OO - STANNOL
No-clean desoldering braid for the quick and reliable removal of solder. Cleaning is not normally necessary afterwards, the solder is quickly absorbed, the desoldering time reduced and component overheating minimised.
|
|
DESOLDERING BRAID 0.8 MM -
Reduces reworking and repair times and minimises the risk of heat damage to the circuit board. Highest capillary and absorption capacity. NO-CLEAN flux for low-residue desoldering. ESD protection.
|
|
DESOLDERING BRAID 2.0 MM -
Reduces reworking and repair times and minimises the risk of heat damage to the circuit board. Highest capillary and absorption capacity. NO-CLEAN flux for low-residue desoldering. ESD protection.
|
|
DESOLDERING BRAID 1.7 MM 2 M -
The practical pen-shape makes it easy to unroll. The braid feed guide is made of metal and prevents the braid from twisting accidentally. With its ergonomic design, the braid dispenser ensures reliable desoldering at the desired location, thus almost completely eliminating accidental burning. The braid is impregnated with flux.
|
|
DESOLDERING BRAID 5.3 MM -
Reduces reworking and repair times and minimises the risk of heat damage to the circuit board. Highest capillary and absorption capacity. NO-CLEAN flux for low-residue desoldering. ESD protection.
|
|
DESOLDERING BRAID 2.5MM, 15M - EDSYN
Flux impregnated according to F-SW 32. Most suitable for desoldering SMD and conventional components, and removing solder residues after desoldering SMD components and printed circuits.
|
|
DESOLDERING BRAID 0.5 MM 1.5 M NC/MW - STANNOL
No-clean desoldering braid for the quick and reliable removal of solder. Cleaning is not normally necessary afterwards, the solder is quickly absorbed, the desoldering time reduced and component overheating minimised.
|
|
DESOLDERING BRAID SMD 0.6 MM, 20M - EDSYN
Flux-impregnated according to F-SW 32 standard. Most suitable for desoldering SMD and conventional components, and removing solder residues after desoldering SMD components and printed circuits.
|
|
DESOLDERING BRAID 2.6 MM, 2M -
The practical pen-shape makes it easy to unroll. The braid feed guide is made of metal and prevents the braid from twisting accidentally. With its ergonomic design, the braid dispenser ensures reliable desoldering at the desired location, thus almost completely eliminating accidental burning. The braid is impregnated with flux.
|
|
DESOLDERING BRAID 3.7 MM -
Reduces reworking and repair times and minimises the risk of heat damage to the circuit board. Highest capillary and absorption capacity. NO-CLEAN flux for low-residue desoldering. ESD protection.
|
|
DESOLDERING BRAID 2.2MM, 1.5M NC/OO - STANNOL
No-clean desoldering braid for the quick and reliable removal of solder. Cleaning is not normally necessary afterwards, the solder is quickly absorbed, the desoldering time reduced and component overheating minimised.
|
|
DESOLDERING ABSORBENT BRAID 1.5M NC/OO - STANNOL
No-clean desoldering braid for the quick and reliable removal of solder. Cleaning is not normally necessary afterwards, the solder is quickly absorbed, the desoldering time reduced and component overheating minimised.
|
|
DESOLD. ABSORB. BRAID W:2.5,L:1.6MM -
In practical plastic reel for fast and clean desoldering.
|
|
DESOLDERING BRAID 1.3 MM 30 M - EDSYN
Flux impregnated to F-SW 32 standard. Most suitable for desoldering SMD and conventional components, and removing solder residues after desoldering SMD components and printed circuits.
|
|
DESOLDERING BRAID 2.8 MM -
Reduces reworking and repair times and minimises the risk of heat damage to the circuit board. Highest capillary and absorption capacity. NO-CLEAN flux for low-residue desoldering. ESD protection.
|
|
DESOLDERING BRAID 2.0 MM 30 M - EDSYN
Flux impregnated to F-SW 32 standard. Most suitable for desoldering SMD and conventional components, and removing solder residues after desoldering SMD components and printed circuits.
|
|
DESOLDERING BRAID 1.5 MM -
Reduces reworking and repair times and minimises the risk of heat damage to the circuit board. Highest capillary and absorption capacity. NO-CLEAN flux for low-residue desoldering. ESD protection.
|
|
SOLDER WIRE LEAD-FREE 1.5 MM - STANNOL
With flux. The melting point of this solder is about 227
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 1.0MM 100 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER, LEAD-FREE SAC3550 0.35 MM 50 G - EDSYN
This high-quality solder wire contains silver. It is lead-free, as required by law from 2006. The no-clean solution means safe solder joints with no need to worry about electrical bridges formed by salt residues.
|
|
SOLDER, LEAD-FREE SAC170 1.0 MM 70 G - EDSYN
This high-quality solder wire contains silver. It is lead-free, as required by law from 2006. The no-clean solution means safe solder joints with no need to worry about electrical bridges formed by salt residues.
|
|
SOLDER SN99CU1 DIA 1.5 MM 250 G - STANNOL
With flux. The melting point of this solder is about 227
|
|
SOLDER, LEAD-FREE SAC870 0.8 MM 70 G - EDSYN
This high-quality solder wire contains silver. It is lead-free, as required by law from 2006. The no-clean solution means safe solder joints with no need to worry about electrical bridges formed by salt residues.
|
|
SOLDER, LEAD-FREE SAC1570 1.5 MM 70 G - EDSYN
This high-quality solder wire contains silver. It is lead-free, as required by law from 2006. The no-clean solution means safe solder joints with no need to worry about electrical bridges formed by salt residues.
|
|
SOLDER SN99CU1 1.0 MM 250 G - STANNOL
With flux. Melting point about 227
|
|
SOLDER SN99CU1 DIA 1.0 MM 250 G - STANNOL
With flux. The melting point of this solder is about 227
|
|
SOLDER SN99CU1 DIA 1.5 MM 500 G - STANNOL
With flux. The melting point of this solder is about 227
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 0.5MM 100 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER, LEAD-FREE SAC570 0.5 MM 70 G - EDSYN
This high-quality solder wire contains silver. It is lead-free, as required by law from 2006. The no-clean solution means safe solder joints with no need to worry about electrical bridges formed by salt residues.
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 1.5MM 250 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER SN99CU1 1.0 MM 500 G - STANNOL
With flux. Melting point about 227
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 1.0MM 500 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 1.5MM 500 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 1.5MM 100 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER SN99CU1 DIA 1.0 MM 500 G - STANNOL
With flux. The melting point of this solder is about 227
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 1.0MM 250 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER SN95.5AG3.8CU0.7 DIA 0,5MM 250 G - STANNOL
With flux. High-quality solder with low melting point of about 217
|
|
SOLDER SN99CU1 DIA 2.0 MM 250 G - STANNOL
With flux. The melting point of this solder is about 227
|
|
TIP-KLEEN - STANNOL
Cleans and tins soldering tips that are oxidised and soiled with rosin residues. Essential for all soldering iron tips.
|
|
SOLDER TIP CLEANER, LEAD-FREE -
This solder tip cleaner both cleans and tins oxidised and soiled solder tips. Completely environment-friendly, as it is lead-free, residue-free and environmentally compatible. It is also resistant to high and low temperatures and comes in ESD-proof packaging. Can with adhesive tape for fixing to the workplace.
|
|
FLUX REMOVAL PENCIL 8 G -
Remove flux within seconds, without leaving residues. Pinpoint accuracy with the dispenser nozzle. Quick-drying
|
|
REPLACEMENT SOLDER TIP 172 LD - ERSA
|
|
REPLACEMENT SOLDERING TIP 132LD - ERSA
|
|
REPLACEMENT SOLDER TIP 032 CD - ERSA
|
|
REPLACEMENT SOLDERING TIP 162LD - ERSA
|
|
REPLACEMENT SOLDER TIP 172 LN - ERSA
|
|
ERSADUR CHISEL BVLD SOLD. TIP 828629 - ERSA
|
|
REPLACEMENT SOLDERING TIP 162KD - ERSA
|
|
REPLACEMENT SOLDERING TIP 032 KD - ERSA
|
|
ERSADUR CHISEL SOLD. TIP STRAIGHT 588019 - ERSA
|
|
SOLD. TIP, CHISEL, NICKEL 588005 - ERSA
|
|
ERSADUR CHISEL SOLDERING TIP FOR 588019 - ERSA
|
|
ERSADUR SOLDERING TIP FOR 588005 - ERSA
|
|
SOLD. TIP, CHISEL NICKEL-PLATED 588019 - ERSA
|
|
SOL. TIP CHISEL-SHPE BEVLD 4.7MM NICKEL - ERSA
|
|
REPLACEMENT SOLDERING TIP 132KD - ERSA
|
|
SOLDER TIP CHISEL 2.2MM ERSADUR 842 CD - ERSA
With increased heat conductivity.
|
|
REPLACEMENT SOLDERING TIP 172 KN - ERSA
|
|
REPLACEMENT SOLDERING TIP 172 KD - ERSA
|
|
ERSADUR CHISEL SOL. TIP STRAIGHT 828629 - ERSA
|
|
ERSADUR CHISEL SOLDERING TIP FOR 588005 - ERSA
|
|
REPLACEMENT SOLDERING TIP 032 JD - ERSA
|
|
