BI-METAL SWITCH 145 DEGREE -
|
|
BI-METAL SWITCH 100 DEGREE -
|
|
BI-METAL SWITCH 85 DEGREE -
|
|
BI-METAL SWITCH 75 DEGREE -
|
|
BI-METAL SWITCH 130 DEGREE -
|
|
EMERGENCY STOP SWITCH - RAFI
At a defined actuating pressure the emergency stop button snaps into its end position. The switch is reset by pulling the mushroom knob back out.
|
|
PANEL-MOUNT CABINET SW. 250V 1POLE BL. -
|
|
FOOT SWITCH 1 POLE UM - MARQUARDT
Housing with rubber feet, non-breakable and non-slip.
|
|
PANEL-MOUNT PUSH-SW. 250V 1POLE WH. -
|
|
MEMBRANE SWITCHPAD 1X12 -
|
|
KEYPAD BLE-1 -
The input keys have a common connection with leads to 12 separate switching contacts in a 2.54 mm grid.
|
|
KEYPAD MATRIX 3X4 -
The input keys have a 7-pole plug connector as common connection.
|
|
MEMBRANE SWITCHPAD 3X4 -
|
|
PANEL-MOUNTED KEYPAD ILLUMINATED - EAO SECME
"The waterproof keypad is ideally suited to indoor and outdoor use where maximum security is required, for instance access control, any kind of machine, telephone, code locks etc. An additional ""security shunt"" is fitted for triggering the alarm if the keypad is removed. CE symbol."
|
|
OVERCURRENT PROTECTION SWITCH -
|
|
PROTECTION SWITCH 12A -
|
|
THERMAL PROTECTION SWITCH 10A -
|
|
PROTECTION SWITCH 6A -
|
|
THERMAL PROTECTION SWITCH 6.5A -
|
|
PROTECTION SWITCH 2.5 A -
|
|
THERMAL PROTECTION SWITCH 1A -
|
|
PROTECTION SWITCH 4A -
|
|
THERMAL PROTECTION SWITCH 2A -
|
|
THERMAL PROTECTION SWITCH 4A -
|
|
PROTECTION SWITCH 10A -
|
|
PROTECTION SWITCH 15A -
|
|
THERMAL PROTECTION SWITCH 0.5A -
|
|
PROTECTION SWITCH 8A -
|
|
MAGNETIC CONTACT RS 168B -
This inexpensive surface-mounted contact with integral terminal screws offers rapid installation with no soldering. Contact is closed when the magnet is applied.
|
|
ROTATIONAL PULSE TRANSMITTER VERTICAL -
|
|
ROTATIONAL PULSE TRANSMITTER HORIZONTAL -
|
|
CROSSBAR SWITCH WITH LOCK - IDEC
"This ""joystick"" switch can move in up to four directions (e.g. up, down, left, right). Momentary-action operation - enabled when lever in actuated position. The operating lever jumps back to its rest (centre) position when released. The switch is fitted with 4 normally open contact elements. Type HW1M-L2222L-F22N9 with deactivation ring to protect against inadvertent use."
|
|
COORDINATE SWITCH - IDEC
|
|
SMD CLOCK FREQUENCY CONTROL LS25 -
New navigation button for surface mounting, in a very small, compact design, watertight.
|
|
TILT SWITCH, HG-FREE -
This switch is fully recyclable and contains no chemical substances. It has a long lifetime and is hermetically sealed.
|
|
MERCURY SWITCH 45 X 10 MM -
|
|
WAFER SWITCH 1 X 12 - DELTRON COMPONENTS
|
|
MINIATURE WAFER SWITCH 6 X 4 -
|
|
WAFER SWITCH 4 X 3 OP. VOLTAGE 300V. - DELTRON COMPONENTS
|
|
WAFER SWITCH 3 X 4 PCB MOUNT - DELTRON COMPONENTS
|
|
MINIATURE WAFER SWITCH 4 X 5 -
|
|
WAFER SWITCH 4 X 3 PCB MOUNT - DELTRON COMPONENTS
|
|
MINIATURE WAFER SWITCH 2 X 12 -
|
|
WAFER SWITCH, 2 X 6 - DELTRON COMPONENTS
|
|
WAFER SWITCH 3 X 4 OP. VOLTAGE 300V. - DELTRON COMPONENTS
|
|
ROTARY SWITCH 2 X 6 - DELTRON COMPONENTS
|
|
ROTARY SWITCH 1 X 12 - DELTRON COMPONENTS
|
|
