DUSPOL COMBI - BENNING
|
|
VOLTAGE TESTER DUSPOL EXPERT - BENNING
|
|
FLUKE TESTER T5-600 - FLUKE
|
|
DIGITAL VOLTAGE TESTER CA 704 - CHAUVIN ARNOUX
The voltage tester is suitable for all types of measurements on connector strips in switching systems or power outlets.Its thin design and user-friendliness ensure reliable and optimum handling. It can also be operated easily while wearing gloves.
|
|
DUSPOL ANALOG - BENNING
|
|
DIGITAL VLTGE TESTER DUSPOL DIGIT.PLUS - BENNING
|
|
DUSPOL COMPACT - BENNING
|
|
2-POLE VOLTAGE TESTER VC-56 - VOLTCRAFT
The voltage tester range from Voltcraft has been made and tested to EN 61243-3/VDE0682 standard, and belongs to overvoltage category CAT III 690 V. These devices belong to Protection Class IP64 and the spray-on soft rubber handle makes them extremely robust and suitable for the toughest jobs.
|
|
2 POLE VOLTAGE TESTER - VOLTCRAFT
|
|
2-POLE VOLTAGE TESTER VC-54 - VOLTCRAFT
The voltage tester range from Voltcraft has been made and tested to EN 61243-3/VDE0682 standard, and belongs to overvoltage category CAT III 690 V. These devices belong to Protection Class IP64; the spray-on soft rubber handle makes them extremely robust and suitable for the toughest jobs.
|
|
DUSPOL MASTER - BENNING
|
|
CABLE TESTER CT-1 - VOLTCRAFT
Cable and wire tester for quick and easy checking of your network installation. This device should be part of every service toolkit. As the tester has an external measurement receiver, it can be used to test both assembled and installed cables. Individual wires are tested in pairs and displayed on 4 LEDs. Includes a cable shielding test. Simple to operate.
|
|
NETWORK SERVICE SET CT-5 - VOLTCRAFT
The CT-5 cable tester was designed especially for quick on-site tests on network and connecting cables. On the front of the device is an RJ 11, RJ 45, IEEE 1394 (Firewire) and USB output socket. You can also test coaxial cables through the BNC connection. Continuity, interruption, short circuit, ground and termination and crossed wires are all displayed using the easy to read indicator lights.
|
|
CABLE CHECKER - VOLTCRAFT
Use this device to identify the assignment of up to 16 wires in a cable. Connect the transmitter to one end of the cable. At the other end, read off the wire numbers of the connected cable on the receiver display. The only requirement is a ground or reference cable (heating or water pipes may be used). In addition, our cable tester can detect contact and ground shorts.
|
|
CT-5 CABLE TESTER - VOLTCRAFT
The CT-5 cable tester was designed especially for quick in-situ testing of patch and network cables. The tester has an RJ -11, RJ -45, IEEE 1394 (Firewire) and USB output socket. You can also test coaxial cables through the BNC connection.
|
|
PROFESSIONAL PC CABLE TESTER CT-7 - VOLTCRAFT PLUS
For quickly and easily testing all common computer cables for continuity, short circuit, open ends, crossover, incorrect wiring, etc. An easy-to-read LED display allows you to test each conductor connection in turn, manually or automatically, so that you can check for multiple ground connections or incorrect crossed connections, or detect breaks in the wire.
|
|
CABLE TESTER CT-2 - VOLTCRAFT
Cable tester for RJ45/11 Western connectors (UTP/STP) and BNC systems. Each wire in the connected cable is checked separately and wire assignments indicated on a clear illuminated bar display. The test (scan) sequence can be controlled manually or automatically.
|
|
CURRENT CALIBRATOR CC-421 -
Use the CC-421 as a process calibrator or a measuring instrument for process signals. The CC-421 combines 4 functions in one device: Precise DC current source: Process current measurements
|
|
DIN RAIL METER 3X230V/65A DUAL - SCHELL
|
|
ENERGY-CHECK 3000 - VOLTCRAFT
Find the power-guzzlers in your home, so you can cut your costs. And there are no installation costs. Simply plug Energy Check into the power outlet, then plug a power consumer into Energy Check. It shows the effective power in W, energy consumption in kWh, as well as the On-time and recorded time. Once you have entered the power unit tariff, you can determine the exact energy costs of your washing machine or refrigerator in Euros and Cents. It even calculates the exact power consumption costs of your TV or
|
|
DIN RAIL METER 230V/25A - SCHELLCOUNT
Power meter in MCB form (1TE), snaps onto a DIN rail. Replaces traditional electro-mechanical meters. The special feature is the low power consumption of 0.5 W.
|
|
DIN RAIL METER 3X230V/65A, SINGLE - SCHELL
|
|
ENERGY MONITOR 3000 - VOLTCRAFT PLUS
The professional tool, if there is one, for tracking down the secret power guzzler in your home. Besides the usual information (effective power in W and energy consumption in kWh), the 3-digit display also shows the effective Cos-Phi power factor, load type (inductive or capacitive) and power frequency. It also has an integrated backup battery, which lets you set and read off the stored values even when the device is switched off. In this way, you can calculate the accumulated power costs over one week, one
|
|
DIN RAIL METER 230V/32A - SCHELLCOUNT
Power meter in MCB form (1TE), snaps onto a DIN rail. Replaces traditional electro-mechanical meters. The special feature is the low power consumption of 0.6 W.
|
|
INSULATION MEASUREMENT UNIT CA 6513 - CHAUVIN ARNOUX
For insulation and contact resistance measurements in accordance with IECE 61557 and VDE 413, Parts 1 and 4.
|
|
INSULATION TESTER VC-1000 - VOLTCRAFT
Measure insulation resistances up to 4000 MO. To do this, set auxiliary voltages of 250, 500 or 1000 V on the VC 1000, as required. The insulation tester also provides a measurement function for DC and AC voltages up to 600 V in CAT III and resistances up to 4 kO. There is even an integrated continuity tester with audible signal. All measurements can be stored at the push of a button. This device complies with DIN 57 411 Part 1/VDE 0411 Part 1, Protective Measures for Electronic Measurement Devices (== IEC
|
|
LCR HANDHELD INSTRUMENT 4080 - VOLTCRAFT PLUS
For extensive measurements on coils, capacitors and resistors. The switchable measurement frequency (125 Hz/1 kHz), high basic accuracy of 0.5 %, multi-functional display and integrated RS-232 interface make the LCR 4080 into a professional tool at an affordable price. Numerous special features such as programmable alarm values, min/max display, manual/auto range, tolerance measurement and backlight complete the package.
|
|
LCR MULTIMETER 4095 - VOLTCRAFT
|
|
LCR METER 9063 - VOLTCRAFT
For measuring resistance, inductance and capacitance
|
|
INDUCTIVITY DECADE BANK L-BOX01 - VOLTCRAFT
With this robust inductor decade of ABS plastic, you can quickly and easily set different resistances, inductance or capacitance. Connected through 4 mm banana connectors. This is therefore an indispensable tool for training, maintenance, service and schools.
|
|
RESISTOR DECADE -
Indispensable for rapid fault-finding in either service or test lab applications. It can set 36 resistance values from 5 O to 1 MO. The resistors are rated 1/4 W. Tolerance 10 %.
|
|
RESISTOR DECADE BOX R-BOX 01 - VOLTCRAFT
With this robust decade resistor of ABS plastic, you can quickly and easily set different resistances, inductance or capacitance. Connected through 4 mm banana connectors. This is therefore an indispensable tool for training, maintenance, service and schools.
|
|
CAPACITY DECADE BANK C-BOX01 - VOLTCRAFT
With this robust decade capacitor of ABS plastic, you can quickly and easily set different resistances, inductance or capacitance. Connected through 4 mm banana connectors. This is therefore an indispensable tool for training, maintenance, service and schools.
|
|
NO-CONTACT VOLTAGE TESTER MS-300 LED - VOLTCRAFT
Practical device for non-contact detection of alternating voltages. If alternating current is present, this is displayed visually by a red LED and audibly by a beeper. With its the robust casing made of spray-on soft plastic, and the shirt-clip, this device is ideal for tough applications. With self-test function.
|
|
MULTITESTER MS-258 II - VOLTCRAFT
The Multitester MS-258 II detects AC voltages in electrical sockets, switches, fuse-boxes, cables etc. Its adjustable sensitivity makes it ideal for detecting live conductors in sockets. In addition, the metal detector function may be used to find metal parts such as nails, cables in walls and ceilings etc., or check the earthing of the metal casings on electrical appliances. The instrument is also suitable for testing continuity, batteries and electronic components. With LED indicator and buzzer.
|
|
VOLTCHECK - VOLTCRAFT
A practical mini-tool with the latest technology.
|
|
MULTITESTER MS-S168 - VOLTCRAFT
This is a real tracker dog, with an incredible array of functions: Beam detector for detecting beams of up to 25mm embedded in walls or ceilings, and contactless detection of AC voltages on embedded cables.
|
|
DUTEST CONTROL - BENNING
Tests continuity in electrical wiring, cables and components (with polarity check).Checked and approved to DIN VDE 0680 standard.
|
|
MULTITESTER MS-18/2 - VOLTCRAFT
The MS-18/2 is a further development of the successful MS-18. This robust tester can be used for virtually any purpose, e.g. household, industry, building sites etc.
|
|
PRO-COMBINATION MS 9160+630 -
|
|
MULTI-MEAS. STATION MS 9160 NEW - VOLTCRAFT
The complete solution for the “3rd generation” lab test station. Four devices in one … with improved technical features and black design. A continuation of the successful MS Series to meet ever-increasing requirements.
|
|
HANDHELD REV. COUNTER DT1 OPTO - VOLTCRAFT
Perfect for measuring the rotational speed of large components, in poor lighting conditions. The measurement is performed using a LED unit. The device is easy to operate. Simply press a button to determine the speed of rotating parts. Attach a reflector to the rotating part, aim the LED towards the reflector and read off the speed. The instrument also has a Min/Max memory.
|
|
HANDHELD TACHOMETER WITH LASER DT1L - VOLTCRAFT
This hand-held tachometer uses a laser to give you reliable measurements of the rotational speed of even very small objects, and in normal daylight. The device has a memory to store minimum and maximum values.
|
|
DIGITAL STROBOSCOPE DS-01/DT-2269 - VOLTCRAFT
Digital stroboscope with full digital control and many useful features. This unit has a flash frequency of 0.3 to 175 Hz, for rotational speeds of 20 to 10,500 RPM (rounds per minute). The unit is microprocessor-controlled and has the following main functions: Flash frequency adjustment by buttons, Fast Frequency Finder, memory for 10 flash rates, display in RPM and Hz, doubling and halving the flash frequency by the push of the button, internal and external trigger function, RS-232 interface. This unit req
|
|
HANDHELD REVOLUTION COUNTER DT2L/K - VOLTCRAFT
One tool does it all. This highly accurate handheld tachometer is used to measure rotation speeds from 0.5 to 99,999 RPM. The measurement can be taken contactlessly by laser, or mechanically using the contact wheels. Three different adapters are supplied for contact-measurements in various measurement applications. The measurement laser allows you to measure rotation speed without the friction that causes measurement errors. The measurement result is displayed on the large five-digit LCD with 21 mm digit-he
|
|
ROTATIONAL SPEED GAUGE RC 200 -
One push of a button will tell you the rotational speed of your propeller or ship’s screw. This handy little device helps you to run your model at the optimum rotational speed. The tachometer shows the speed measurements directly and immediately on the LCD. So you can find out quickly and reliably the rotational speeds of shafts, wheels, propellers and screws. The best results are obtained when there is high contrast between the rotating part and the background. Otherwise, a marking should be attached. For
|
|
ROTATIONAL FLD DIRECTION TESTER CA6607 - CHAUVIN ARNOUX
Three functions in one device: Rotating field direction test, motor direction test and phase discontinuity indicator.
|
|
PHASE SEQUENCE INDICATOR -
|
|
RCD TESTER -
The Deltatest is used to test RCDs in electrical installations. The nominal fault currents are fixed and can be selected using the knob. The insulated PC casing is specially shock-resistant.
|
|
SOLENOID TESTER PLUS P-95 -
This pocket-size tester checks for the magnetic field around solenoid valves, coils and relays. Just hold the sensor close to the electro-magnetic coil, and the LED and audible signal will indicate whether the coil is working. The tester operates without contacting any live parts.
|
|
MICROWAVE LEAKAGE DETECTOR MT-128 - VOLTCRAFT
You can test your microwave oven regularly to avoid exposure to dangerous radiation. Leaks are indicated immediately on the analogue scale. No batteries required.
|
|
COMPACT DSP TEST TELEPHONE - TEMPO
Fully-featured test telephone at a bargain price. Compact DSP (Digital Service Protection) was developed to ensure correct operation on lines where digital signal/mains/remote supply/error voltages can be produced by faulty or crossed wires. When you connect this device to a line that is carrying a voltage over 75 V/DC (analog systems are supplied with a voltage of 24 V to 66 V), an alarm signal is sounded (digital voltage alarm). This indicates that the line is digital, not analaog. The integrated monitor
|
|
EUROTEST 701/702 - HJS
With this device you can quickly and reliably perform all specified measurements as described in DIN VDE 0701, 0702, 0105. Use the Eurotest to measure: Earth contact resistance R-PE
|
|
CABLE DETECTOR LSG-3 - VOLTCRAFT
If you have lost track of your electrical system or your network, then the LSG-3 is what you need. A practical detector for tracking and identifying lines and cables. It can also test telephone and network cables (coaxial, 10/100/100 Base-T) for correct wiring and continuity. The LSG-3 uses a high-frequency tone generator which modulates a HF signal on the test cable. It also includes a highly sensitive inductive receiver, which can detect cables up to 15 cm inside a wall. This allows you to track cable lay
|
|
CABLE DETECTOR LSG-2 - VOLTCRAFT
The LSG-2 is highly sensitive and multifunctional, to locate and identify live and unpowered cables as well as metal pipes. The sensitivity is adjustable to locate changes in direction or interruptions in cables and pipes accurately and reliably, even under 20 cm inside walls. Includes a transmitter and a sensitive receiver probe. The LSG-2 can also detect magnetic fields from AC equipment to test power supplies and transformers. The receiver has a LED flashlight. It can also test cables for continuity and
|
|
